Hioki BT4560

Product Highlights

• Low-frequency AC-IR measurement* enables faster measurement *The BT4560 eliminates the need for charging or discharging by measuring internal impedance at a low frequency of 1 Hz or below
• Extremely reliable measurements for low-impedance batteries *The BT4560 uses a testing current of 1.5 A at the 3mΩ range, which improves the S/N ratio
• Circuit configuration highly tolerant of contact and wire resistance to provide stable measurements
• Simultaneous measurement of impedance and voltage
• Allowable input voltage Up to 5 V
• Measured information Impedance, voltage, temperature
• Impedance measurement Parameters: R, X, Z, θ, Frequency: 0.1 Hz to 1050 Hz, Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Testing current: 3 mΩ range: 1.5 Arms, 10 mΩ range: 500 mArms, 100 mΩ range: 50 mArms
• Voltage measurement Measurement range: 5.00000 V (single range), Measurement time: 0.1 s (Fast) to 1.0 s (Slow)
• Temperature measurement Range: -10.0 °C to 60.0 °C, Measurement time: 2.3 s
• Basic accuracy Z: ±0.4% rdg. θ: ±0.1 °, V: ±0.0035% rdg. ±5 dgt. , Temperature: ±0.5 °C (at 10.0 to 40.0 °C)
• Functions Comparator, self-calibration, sample delay, average, contact check, measurement current error, and other
• Interfaces RS-232C/USB (virtual COM port) * Cannot be used simultaneously EXT. I/O (NPN/PNP can be switched)
• Power supply 100 to 240 V AC, 50/60 Hz, 80 VA max
• Dimensions and mass 330 mm (12.99 in) W × 80 mm (3.15 in) H × 293 mm (11.54 in) D, 3.7 kg (130.5 oz)

Each Unit Includes

• Power cord
• Instruction manual
• Zero-adjustment board
• USB cable (A-B type)
• CD-R (communication instruction manual PC application software USB driver)